‧	Suitable for drilling General Steels, Alloy Steels with hardness under HRC30, Cast Iron and Cast Steel, etc.
‧	Suitable for drilling operations on drilling machines, lathes and bench lathes.

‧	Noss Drill, suitable for general work material, is simple and economic in drilling.
‧	The V-shot of shank, which combines with the clutches of chuck, fixes th drill during operation.
‧	Noss Drill can be used on drilling machines, and the drilling diameter could reach 35mm even larger.
‧	It’s convenient and efficient to operate at the building sites.
‧	For protection of he chuck, the shank is packed with a plastic ring. During operation, the drill will be collected well to get a more precise hole. The precise hole. The performance and the tool life will also be improved.

‧	Suitable for drilling General Steels, Alloy Steels with hardness under HRC 30, Cast Iron and Cast Steel, etc.
‧	Morse taper shank can be fitted into sleeve.

‧	Suitable for drilling General Steels, Alloy Steels with hardness under HRC 30, Cast Iron and Cast Steel, etc.
‧	Suitable for drilling operations on drilling machines, lathes and bench lathes.

‧	Basic on HSE feartures heat and wear resistance.
‧	Special shapes of helical flutes combined with 〝X〞thing provide low thrust force and excellent chip removal.
‧	Suitable for drilling General Stells, Stainless Steel, Aluminum Alloy and Cast Iron, etc.

‧	Basic on HSE feartures heat and wear resistance.
‧	Surface is coated with TiAlN HV3000. The drills are ideal for high speed and high speed and high feed rate drilling to reduce machining time.
‧	Special shapes of helical flutes combined with 〝X〞thining provide low thrust force and excellent chip removal.
‧	Suitable for drilling General Steels, Grey Cast Iron, Alloy Steel, Stainless Steel and Aluminum Alloy, etc.

‧	Basic on HSE feartures heat and wear resistance.
‧	Surface is coated with TiN HV2000, featuring low friction coefficient, anti-adhere and superior cutting perforanance.
‧	Thick web design provides high rigidity, superior bending-resistance and minimum vibration
‧	Special shapes of helical flutes ensure excellent chip removal. 〝X〞thining reduces length of chisel edge and thrust load. The drills are ideal for deep hole drilling with depth over 3 times of drill diameter.
‧	Suitable for drilling General Steels, Alloy Steel and Cast Iron, etc.

‧	Basic on HSE feartures heat and wear resistance.
‧	Thick web design provides high rigidity, superior bending-resistance and minimum vibration.
‧	Special shapes of helical flutes ensure excellent chip removal. 〝X〞thining reduces length of chisel edge and thrust load.
‧	The drills are ideal for deep hole drilling.
‧	Suitable for drilling General Steels, Grey Cast Iron, Alloy Steel, Cast Iron and Aluminum Alloy,etc.

‧	Basic on HSE feartures heat and wer resitance.
‧	Think web design provides high rigidity and minimum vibration.
‧	"X" thining reduces thrust load, accurates concentricity and dissipates heat easily.
‧	Suitable for drilling tough materials, such as Stainless Steel, Titanium Alloy and Heat-resistant Steel, etc.

‧	Surface is coated with TiN HV2000, featuring maximum wear-resistance, low friction-coefficient, anti-adhere, superior cutting performance and service life extended to 3 times.
‧	Drilling speed is increased by 30% at a constant feed rate.
‧	Suitable for drilling General Steels, Alloy Steel, Tempered Steel, Aluminum Alloy and Cast Iron, etc.

‧	40˚helix angle makes the drills ideal for drilling workpieces with low tensile strength, soft, long chips and easy to adhere on cutting edges.
‧	Suitable for drilling Aluminum, Aluminum Alloy, Zinc and Refined Bronze, etc.

‧	Specially designed drills that are suitable for drilling holes for general screws.
‧	Allow for two machining processes accomplished by one process, and provide superior concentricity.

‧	Basic on HSS-CO feartures heat and wear resistance.
‧	Surface is coated with TiN HV 2000, featuring maximum wear-resistance, low friction-coefficient, anti-adhere, superior cutting performance and long service life.
‧	Precise position and chamfer are accomplished at one time to improve machining quality.
‧	Suitable for drilling General Steels, Alloy Steel, Tempered Steel, Cast Iron and Aluminum Alloy, etc.

‧	35˚ helix angle combined with 160˚+100˚point angle design reduces axial thrust while upgrading machining accuracy without burrs on hole edge.
‧	Surface is coated with TiN HV2000, featuring maximum wear-resistance, low friction-coefficient, anti-adhere, superior cutting performance and long service life.
‧	Especially ideal for drlling holes oh H Beam Structural Steel.

‧	Basic on HSS-CO feartures heat and wear resistance.
‧	Suitable for drilling tough materials, such as Heat-Resistant Steel, Stainless Steel, Alloy Steel and Steel with harednes over HRC28.

‧	Basic on HSS-CO feartures heat and wear resistance.
‧	Suitable for drilling tough materials, such as Heat-Resistant Steel, Stainless Steel, Alloy Steel and Steel with harednes over HRC28.

‧	Suitable for drilling Alloy Tool Steel and Stainless Steel watchstraps.

‧	Basic on HSE feartures heat and wear resistance.
‧	Suitable for drilling various steels with tensile strength up to 1000N/mm (HRC 32),Stainless Steel and Cast Iron,etc.

‧	Basic on HSE feartures heat and wear resistance.
‧	Suitable for drilling various steels with tensile strength up to 1000N/mm (HRC 32),Stainless Steel and Cast Iron,etc.